Setting a new benchmark in the 200-300 hp class
The latest generation of the Fendt 700 Vario sets new standards worldwide in this segment. In addition to its impressive performance, the highlights of the Fendt 700 Vario Gen7 include its enormous flexibility, sustainable technologies and features that will make it your new favourite.
Inspired by the needs and ideas of our customers and our claim to produce the best innovations and technologies, we have developed a tractor that leaves nothing to be desired – the Fendt 700 Vario Gen7.
Farm Machine 2023 & Tractor of the Year 2023
Due to its intuitive operation with FendtONE, high performance with low fuel consumption and its versatile application, the Fendt 700 Vario was awarded “Farm Machine 2023” and “Tractor of the Year 2023”.
Model Overview
| 720 Vario Gen7 | 149 kW* | 203 HP* |
| 722 Vario Gen7 | 164 kW* | 223 HP* |
| 724 Vario Gen7 | 179 kW* | 243 HP* |
| 726 Vario Gen7 | 193 kW* | 262 HP* |
| 728 Vario Gen7 | 223 kW** | 262 HP* |
Gen7 Highlights
Fendt iD Low-Speed Concept
The 2-gallon (7.5 litres) AGCO Power engine was developed specifically for the Fendt 700 Vario Gen7. Thanks to the Fendt iD low-speed concept, the highest torque is achieved at low engine speeds. The rated engine speed is only 1,700 rpm, which promotes low fuel consumption.
Intelligent VarioDrive
Fendt VarioDrive stands for a stepless, dynamic driving at any speed from 0.01 to 37 MPH (0.02 to 60 km/h). The front and rear axles are driven separately. Thanks to an intelligently controlled all-wheel drive clutch, manual control of the 4WD system are no longer necessary. Additional comfort is provided by omitting the driving range switching I/II. The pull-in turn effect of the VarioDrive enables the smallest possible turning circle to be achieved.
Integrated Tyre Pressure Control System
For maximum ground protection and tractive power: New tyre dimensions are used on the Fendt 700 Vario Gen7, with rear tyre diameter of up to 6.7 feet (2.05m) and a front tyre diameter of up to 5.2 feet (1.60m). With the integrated VarioGrip tyre pressure control system, the tyre pressures can easily be adjusted via the terminal. This can save up to 8% diesel and achieve up to 10% more tractive power in the field. VarioGrip features onboard valve and air guidance technology and is suitable for stub and flange axles and row-crop tyres. Thanks to the protected design, there is no risk of the air lines being torn off.
Superior Maneuverability
With a turning circle of only 32.8 feet (10.0m) on 540/65 R30 tyres, the Fendt 700 Vario Gen7 is enormously maneuverable. Even with 600/70 R30 tyres, the turning circle is only 38.7 feet (11.8m) – outstanding in the 300 hp class!
Extremely Low Weight-to-power Ratio
The top model Fendt 728 Vario has a power-to-weight ratio of only 30.5kg/hp. With a permissible gross weight of 15t (25 MPH and 31 MPH or 40km/h and 50km/h versions), a high payload of up to 6.2t is available.
New Generation Front Loader
A maximum lifting capacity of 4,070kg and a lifting height of 16 feet (4.85m) leave nothing to be desired in terms of loading performance. The Fendt Cargo 6.100 has its own valve block with separate front loader valves, a new multi-coupler, and working lights on the loader frame. In addition, a new universal bucket with a width of 8 feet (2.55m) is available. For the first time, the weighing function (individual and total weight) can be used in any position, making it possible to weigh pallets, for example.
New Premium Driver’s Seat
In addition to the multi-stage seat heating and air conditioning, a massage function also ensures maximum comfort. The backrest, side bolsters and lumbar support of the seat as well as the longitudinal adjustment can be adjusted electrically. Further comfort functions can be conveniently operated and set in the terminal. The individual driver settings are stored in the respective user profile thanks to the integrated memory function.
FendtONE On & Offboard
FendtONE Onboard
With the FendtONE driver’s workstation (onboard), you make your work in the field even more effective:-
- Simple, customizable operation with a central arrangement of all controls
- Up to three display options: 10″ dashboard, 12″ terminal on the armrest, 12″ terminal retractable into the cab roof
- Extensive automation of processes via Section Control, TI Headland, and Fendt Implement Management (TIM)
FendtONE offboard
With FendtONE offboard, you expand existing applications on the tractor with useful complementary functions:
- Agronomy: Plan activities in the field and receive comprehensive reports
- Track guidance: manage field boundaries and way lines and keep them consistent across the fleet
- Telemetry: monitor key machine data and live fleet positions in the field
Performance
Performance on a new scale: technologies such as the Fendt DynamicPerformance multi-output concept, a cooling concept with a pressurised fan and high-performance hydraulics with a delivery rate of up to 220 l/min make the Fendt 700 Vario Gen7 a pioneer in the 200 – 300 hp class.
Added performance concept: Fendt DynamicPerformance
In the top model Fendt 728 Vario Gen7, an additional performance of up to 20 hp is available regardless of the driving speed. This offers the following advantages:
- Lighter tractor with higher power
- Less fuel consumption per ha
Engine: AGCO Power CORE75
An AGCO Power CORE engine is used for the first time in the Fendt 700 Vario Gen7. This is an all-new family of diesel engines that continues the legacy of AGCO Power’s durable and future-proof designs, developed with tomorrow’s alternative fuels in mind.
The CORE75 with 7.5 litre displacement and 223 kW (303 hp) features excellent torque, low fuel consumption and high reliability.
- superior torque of 1,450 Nm
- best fuel efficiency thanks to Fendt iD low-speed concept (nominal speed at only 1,700 rpm)
- robust and simple construction
- innovative design for improved turning radius and increased ground clearance
- long service life and low maintenance costs
- compatible with renewable HVO fuels
- very good cold-start characteristics
Cooling concept: Concentric Air System (CAS) with pressurised fan
The concentric, forced-air fan has an independent, hydrostatic drive. Its extremely small design allows a large steering angle and is thus responsible for the outstanding maneuverability of the Fendt 700 Vario Gen7. With up to 40% less drive power compared to a standard fan, it is also enormously efficient, saving fuel.
High-performance hydraulics
With the high-performance hydraulics, a considerable flow rate of up to 220 l/min is available. The modular coupling system gives you the choice between UDK, DUDK and flat-sealing FFC couplings in the front and rear.
220 l/min Delivery Rate
Pure performance. For every application.
The Fendt 700 Vario Gen7 sets new standards in driving dynamics. The powerful engine with 221 kW / 303 hp maximum output results in a power-to-weight ratio of 30.5 kg/hp. If desired, the VarioDrive powertrain accelerates the Fendt 700 Vario up to 60 km/h. This allows you to effortlessly and fuel-efficiently master transport tasks that require agility, speed and high payloads.
Sustainability
Fendt has been making a significant contribution to sustainable agriculture for many years. We achieve the strongest impact for environmental sustainability where it counts: with our products.
VisioPlus cabin
The spacious cabin comes with a continuous field of vision of 77° and numerous details, such as the large cooling and warm box, an additional windscreen wiper on the right side, a powerful air conditioning system and numerous storage compartments.
77° Continuous field of vision
Fendt Stability Control
With smart assistance systems such as Fendt Stability Control, increased comfort and improved safety are guaranteed. The system automatically reduces side lean at driving speeds above 20 km/h and actively suppresses roll when cornering.
Digital bonnet and rear camera
With their high-resolution image quality, the bonnet and rear cameras ensure maximum safety and a good view of the front and rear attachment areas.
Technical data Fendt 700 Vario Gen7
General Overview
| Power ECR R 120 | 203 hp – 262 hp (303 hp with DynamicPerformance) |
| Max. Torque at 1300 rpm | 1,090 Nm – 1,450 Nm |
| Forward Speed Range | 0,02 – 50 km/h – 0,02 – 60 km/h |
| Rear PTO | 540 / 540E / 1000 / 1000E |
| Front PTO (optional) | 1000 |
| Hydraulic Pump | 165 l/min (optional 220 l/min) |
| Max. Lifting Capacity Rear Linkage | 11050 daN |
| Max. Lifting Capacity Front Linkage | 5300 daN |
| Operating Weight (incl. common accessories; +/-5%) | 8800 – 9650 kg |
| Max. Permissible total weight up to 50 km/h | 15000 kg |
720 Vario Gen7
| Power ECR R 120 | 203 hp |
| Max. Torque at 1300 rpm | 1,090 Nm |
| Forward Speed Range | 0.02 – 50 km/h |
| Rear PTO | 540 / 540E / 1000 / 1000E |
| Front PTO (optional) | 1000 |
| Hydraulic Pump | 165 l/min (optional 220 l/min) |
| Max. Lifting Capacity Rear Linkage | 11050 daN |
| Max. Lifting Capacity Front Linkage | 5300 daN |
| Operating Weight (incl. common accessories; +/-5%) | 8800 – 9250 kg |
| Max. Permissible total weight up to 50 km/h | 15000 kg |
722 Vario Gen7
| Power ECR R 120 | 223 hp |
| Max. Torque at 1300 rpm | 1,150 Nm |
| Forward Speed Range | 0.02 – 50 km/h |
| Rear PTO | 540 / 540E / 1000 / 1000E |
| Front PTO (optional) | 1000 |
| Hydraulic Pump | 165 l/min (optional 220 l/min( |
| Max. Lifting Capacity Rear Linkage | 11050 daN |
| Max. Lifting Capacity Front Linkage | 5300 daN |
| Operating Weight (incl. common accessories; +/-5%) | 8800 – 9250 kg |
| Max. Permissible total weight up to 50 km/h | 15000 kg |
724 Vario Gen7
| Power ECR R 120 | 243 hp |
| Max. Torque at 1300 rpm | 1,220 Nm |
| Forward Speed Range | 0.02 – 50 km/h |
| Rear PTO | 540 / 540E / 1000 / 1000E |
| Front PTO (optional) | 1000 |
| Hydraulic Pump | 165 l/min (optional 220 l/min) |
| Max. Lifting Capacity Rear Linkage | 11050 daN |
| Max. Lifting Capacity Front Linkage | 5300 daN |
| Operating Weight (incl. common accessories; +/-5%) | 8800 – 9250 kg |
| Max. Permissible total weight up to 50 km/h | 15000 kg |
726 Vario Gen7
| Power ECR R 120 | 262 hp |
| Max. Torque at 1300 rpm | 1,318 Nm |
| Forward Speed Range | 0.02 – 60 km/h |
| Rear PTO | 540 / 540E / 1000 / 1000E |
| Front PTO (optional) | 1000 |
| Hydraulic Pump | 165 l/min (optional 220 l/min) |
| Max. Lifting Capacity Rear Linkage | 11050 daN |
| Max. Lifting Capacity Front Linkage | 5300 daN |
| Operating Weight (incl. common accessories; +/-5%) | 9200 – 9650 kg |
| Max. Permissible total weight up to 50 km/h | 15000 kg |
728 Vario Gen7
| Power ECR R 120 | 303 hp (with DynamicPerformance) |
| Max. Torque at 1300 rpm | 1,450 Nm |
| Forward Speed Range | 0.02 – 60 km/h |
| Rear PTO | 540 / 540E / 1000 / 1000E |
| Front PTO (optional) | 1000 |
| Hydraulic Pump | 165 l/min (optional 220 l/min) |
| Max. Lifting Capacity Rear Linkage | 11050 daN |
| Max. Lifting Capacity Front Linkage | 5300 daN |
| Operating Weight (incl. common accessories; +/-5%) | 9200 – 9650 kg |
| Max. Permissible total weight up to 50 km/h | 15000 kg |
